117-01, Jalan Rosmerah 2/16,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+6011-28108258
+607-2887322
JTCIS8258
- Electronic Labeling Machine & Printing Accessories
- AirTac Fittings and Tubings
- AirTac Valves
- AirTac Air Valves
- AirTac Flow Control/ Mechanical Valves
- AirTac Control Valve M3 Series
- AirTac Control Valve M5 Series
- AirTac Control Valve S3 Series
- AirTac Flow Control Hand Lever Valve
- AirTac Flow Control Valve ASC Series
- AirTac Flow Control Valve CM3 Series
- AirTac Flow Control Valve ZM3 Series
- AirTac Foot Pedal Valve
- AirTac Hand Slide Valve
- AirTac Non-Return Valve
- AirTac Pilot Non-Return Valve
- View All
- AirTac Fluid Control Valve (2/2 way)
- AirTac 2J Series Angle Seat Valve (2/2 way) (Air Piloted)
- AirTac 2KL Series Fluid Control Valve (2/2 way)
- AirTac 2KS Series Fluid Control Valve (2/2 way)
- AirTac 2KW Series Fluid Control Valve (2/2 way)
- AirTac 2L Series Fluid Control Valve (2/2 way)
- AirTac 2P Series Fluid Control Valve (2/2 way)
- AirTac 2S Series Fluid Control Valve (2/2 way)
- AirTac 2VSeries Fluid Control Valve (2/2 way)
- AirTac 2W Series Fluid Control Valve (2/2 way)
- View All
- AirTac Solenoid Valves
- AirTac ISO Solenoid Valve ESV Series
- AirTac Namur Valve
- AirTac Solenoid Valve 4V Series
- AirTac Solenoid Valve 6HV Series
- AirTac Solenoid Valve 6TV Series
- AirTac Solenoid Valve 6V Series
- AirTac Solenoid Valve CPV10 Series
- AirTac Solenoid Valve CPV15 Series
- AirTac Solenoid Valves 3V series
- AirTac Solenoid Valves 7V Series
- View All
- View All
- AirTac F.R.L.
- AirTac Cylinder
- AirTac Linear Guide Bearing
- Festo Cylinder
- Norgren
- Pneumatic Products
- Nitto Pneumatic Quick Coupler
- Hakko Eightron Hose
- Electrical Products
- Autonics Controller
- Schneider Electric
- DELTA Electronics
- HELUKABEL (Wire & Cabel)
- SIEMENS
JTC Industrial Solutions
117-01, Jalan Rosmerah 2/16,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
117-01, Jalan Rosmerah 2/16,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
LS0H (Single core, halogen-free)
| Previous | 1 / 3 | Next |
Technical Data:
- Single cores for low emission of smoke and corrosive gases in case of fire to
- Permissible working temperature at conductor +90°C
- Nominal Voltage: LS0H = U0 /U 600/1000 V
- Test Voltage: 3500V
- Insulation Resistance: min. 10 MOhm x km
- Minimum Bending Radius: approx. 10 x Ø
Cable Structure:
- Bare Cu-conductor, fi newire stranded according to cl.5, IEC 60228
- Core insulation of Low smoke halogen free compound.
- Core identi cation see table below
- LS0H = Low Smoke Zero Halogen
Properties:
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: Behaviour in re self-extinguishing and flame retardant to IEC 60754 & IEC 60332-3C (equivalent DIN VDE 0472 part 804 test method B)
- Smoke density acc. to DIN EN 61034-1+2/ IEC 61034-1+2
Application:
Halogen-free single-core wires are used for installation in dry environments for wiring up lighting fixtures and units where valuable assets are to
protected from further damage resulting from fire. These cables are suitable for laying in tubes on and under plaster, as well as in closed installation
ducts.
LS0H, suitable for protected, permanent laying in or on lighting installations or switching and control equipment up to 1000 V.
- Single cores for low emission of smoke and corrosive gases in case of fire to
- Permissible working temperature at conductor +90°C
- Nominal Voltage: LS0H = U0 /U 600/1000 V
- Test Voltage: 3500V
- Insulation Resistance: min. 10 MOhm x km
- Minimum Bending Radius: approx. 10 x Ø
Cable Structure:
- Bare Cu-conductor, fi newire stranded according to cl.5, IEC 60228
- Core insulation of Low smoke halogen free compound.
- Core identi cation see table below
- LS0H = Low Smoke Zero Halogen
Properties:
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: Behaviour in re self-extinguishing and flame retardant to IEC 60754 & IEC 60332-3C (equivalent DIN VDE 0472 part 804 test method B)
- Smoke density acc. to DIN EN 61034-1+2/ IEC 61034-1+2
Application:
Halogen-free single-core wires are used for installation in dry environments for wiring up lighting fixtures and units where valuable assets are to
protected from further damage resulting from fire. These cables are suitable for laying in tubes on and under plaster, as well as in closed installation
ducts.
LS0H, suitable for protected, permanent laying in or on lighting installations or switching and control equipment up to 1000 V.