117-01, Jalan Rosmerah 2/16,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+6011-28108258
+607-2887322
JTCIS8258
- Electronic Labeling Machine & Printing Accessories
- AirTac Fittings and Tubings
- AirTac Valves
- AirTac Air Valves
- AirTac Flow Control/ Mechanical Valves
- AirTac Control Valve M3 Series
- AirTac Control Valve M5 Series
- AirTac Control Valve S3 Series
- AirTac Flow Control Hand Lever Valve
- AirTac Flow Control Valve ASC Series
- AirTac Flow Control Valve CM3 Series
- AirTac Flow Control Valve ZM3 Series
- AirTac Foot Pedal Valve
- AirTac Hand Slide Valve
- AirTac Non-Return Valve
- AirTac Pilot Non-Return Valve
- View All
- AirTac Fluid Control Valve (2/2 way)
- AirTac 2J Series Angle Seat Valve (2/2 way) (Air Piloted)
- AirTac 2KL Series Fluid Control Valve (2/2 way)
- AirTac 2KS Series Fluid Control Valve (2/2 way)
- AirTac 2KW Series Fluid Control Valve (2/2 way)
- AirTac 2L Series Fluid Control Valve (2/2 way)
- AirTac 2P Series Fluid Control Valve (2/2 way)
- AirTac 2S Series Fluid Control Valve (2/2 way)
- AirTac 2VSeries Fluid Control Valve (2/2 way)
- AirTac 2W Series Fluid Control Valve (2/2 way)
- View All
- AirTac Solenoid Valves
- AirTac ISO Solenoid Valve ESV Series
- AirTac Namur Valve
- AirTac Solenoid Valve 4V Series
- AirTac Solenoid Valve 6HV Series
- AirTac Solenoid Valve 6TV Series
- AirTac Solenoid Valve 6V Series
- AirTac Solenoid Valve CPV10 Series
- AirTac Solenoid Valve CPV15 Series
- AirTac Solenoid Valves 3V series
- AirTac Solenoid Valves 7V Series
- View All
- View All
- AirTac F.R.L.
- AirTac Cylinder
- AirTac Linear Guide Bearing
- Festo Cylinder
- Norgren
- Pneumatic Products
- Nitto Pneumatic Quick Coupler
- Hakko Eightron Hose
- Electrical Products
- Autonics Controller
- Schneider Electric
- DELTA Electronics
- HELUKABEL (Wire & Cabel)
- SIEMENS
JTC Industrial Solutions
117-01, Jalan Rosmerah 2/16,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
117-01, Jalan Rosmerah 2/16,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
H07V-K / (H)07V-K (PVC-Single Cores, Fine wire stranded)
| Previous | 2 / 3 | Next |
Technical Data:
- PVC single cores to DIN VDE 0285-525-2-31 /DIN EN 50525-2-31 and IEC 60227-3
- Temperature Range: Flexing -5°C to +70°C , Fixed installation -30°C to +80°C
- Nominal Voltage: U0/U450/750V
- Test Voltage: 2500V
- Insulation Resistance: min. 10 MOhm x km
- Minimum Bending Radius: Fi xed insatallation core Ø 8 mm: 4x core Ø, core Ø > 8-1 2 mm: 5x core Ø, core Ø > 12 mm: 6x core Ø
- Radiation Resistance: Up to 80 x 10^6 cJ/kg (up to 80Mrad)
Cable Structure:
- Bare Cu-conductor, to DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5
- Core insulation of PVC compound type TI1 to DIN VDE 0207-363-3 / DIN EN 50363-3 and IEC 60227-3
- Core identi cation see table below
Properties:
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: PVC self-extinguishing and ame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
Note:
- The following colours are recommended (only single colour): black, white, blue, grey, brown, red, orange, turquoise, violet and pink. Two-coloured combinations are not allowed, with exceptions of green-yellow.
- Colours yellow, green, transparent only in (H)07V-K available.
- Two-coloured combination is only permitted for (H)07V-K.
Application:
These single cores are suitable for laying in tubes, under and surface mounting of plasters and also in closed installation conduits. These are not allowed to install for direct laying on cable trays, channels or tanks. These types are permitted for the inner wiring of equipment, distributor and switchboards and also for protective laying to the lightings with a nominal voltage up to 1000 V alternating current or up to 750 V direct current against earth.
CE = The product is conformed with the EC Low-Voltage Directive 2006/95/EC.
- PVC single cores to DIN VDE 0285-525-2-31 /DIN EN 50525-2-31 and IEC 60227-3
- Temperature Range: Flexing -5°C to +70°C , Fixed installation -30°C to +80°C
- Nominal Voltage: U0/U450/750V
- Test Voltage: 2500V
- Insulation Resistance: min. 10 MOhm x km
- Minimum Bending Radius: Fi xed insatallation core Ø 8 mm: 4x core Ø, core Ø > 8-1 2 mm: 5x core Ø, core Ø > 12 mm: 6x core Ø
- Radiation Resistance: Up to 80 x 10^6 cJ/kg (up to 80Mrad)
Cable Structure:
- Bare Cu-conductor, to DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5
- Core insulation of PVC compound type TI1 to DIN VDE 0207-363-3 / DIN EN 50363-3 and IEC 60227-3
- Core identi cation see table below
Properties:
- The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers
- Test: PVC self-extinguishing and ame retardant acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
Note:
- The following colours are recommended (only single colour): black, white, blue, grey, brown, red, orange, turquoise, violet and pink. Two-coloured combinations are not allowed, with exceptions of green-yellow.
- Colours yellow, green, transparent only in (H)07V-K available.
- Two-coloured combination is only permitted for (H)07V-K.
Application:
These single cores are suitable for laying in tubes, under and surface mounting of plasters and also in closed installation conduits. These are not allowed to install for direct laying on cable trays, channels or tanks. These types are permitted for the inner wiring of equipment, distributor and switchboards and also for protective laying to the lightings with a nominal voltage up to 1000 V alternating current or up to 750 V direct current against earth.
CE = The product is conformed with the EC Low-Voltage Directive 2006/95/EC.